Atlas GE C30-7

Discard existing couplers but save retaining pins. Use #33 Coupler with torsion spring on bottom and no coupler lid. File retaining pin carefully to fit through box. Slip assembled coupler into pocket until holes line up (snug Fit). Press retaining pin through coupler into platform to secure assembly.

If an after-market snow plow is fitted, use a #36 long center shank coupler for the needed clearance.

If you desire more coupler swing for smaller radii track (18"), a #454 Swing Bracket can be fitted with some modifications to the platform and pocket opening.

Atlas 2 Bay Cylindrical Hopper

Use NO.5®Coupler with standard centering spring. "Drop in."

Atlas 3 Bay Cylindrical Hopper

Use NO.5®Coupler with standard centering spring. "Drop in."

Atlas 6 Bay Cylindrical Hopper

Use NO.5®Coupler with standard centering spring. "Drop in."

HO List

Specific HO Conversions

Kadee^® Quality Products Co. products are not toys and are not intended for children under 14 years old.
WARNING: CHOKING HAZARD - Small Parts - Not for children under 14 years.

©2011 Kadee^® Quality Products Co.
2/10/2009