#156-25 Bulk Pack - 25 pair #156 Scale Whisker® Metal Couplers

$49.95

  • Model: 156-25
Qty :
remove add
Description

156-25 Bulk Pack - 25 pair #156 "Scale" Whisker® Metal Coupler - Long Centerset Shank without gearboxes



HO-Scale      MAGNE-MATIC


The #156 "Scale" Long Coupler will work anywhere a #26, #36, & #146 Coupler will work.

The #156 "Scale" All Metal Self-Centering WHISKER® Coupler features a "Scale" Metal Coupler (a smaller head coupler which is more to scale and is patterned after the type 'E" couplers) & Metal WHISKER® Centering Spring, insulated Draft Gear Box and Lid. The #156 Coupler may be mounted in Manufacturers cast-on coupler pockets or any of our HO-Scale draft gear boxes (except #233 30-series gear box). The coupler will couple and uncouple with other Kadee® HO and HOn3 couplers. The coupler has the same shank length as the #26, 36 or 46 coupler which will allow the modeler to remove the existing #26, 36 or 46 coupler and replace with the new smaller coupler. The #156 coupler is made of the same metal as the #46 for strength and rigidity.

It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.

Refer to our helpful Coupler Conversion Charts to determine the appropriate coupler to use on your model.

Whisker Coupler Instructions

Twenty Five pair per package
without gearboxes

HO-Scale

UPC: 765484156253

USA Flag  Made in the U.S.A.

Package Includes:

  • (25) Pair #156 Scale Whisker® Metal Couplers - Long Centerset Shank
  • (Extra) #625 Knuckle Springs

#156 Scale Whisker® Metal Coupler Features:
Material  -   Metal
Shank Length  -   Long (25/64") (center hole to back of coupler head)
Coupler Offset  -  Centerset
Knuckle Spring  -   #625
Centering System  -   Whisker®
Head  -   Scale Head
Works In Place of  -   #26, #36 (#146 in a #252 box), long centerset "clone" couplers
Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes


Mounting Specifications:
Mounting Height  -   25/64"
Centerline  -   25/64"
Trip Pin Height  -   1/32"
Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary)

Recommended Tools:


Delayed Magnetic Uncoupling


WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

WARNING WARNING: CHOKING HAZARD - Small Parts - Not for children under 14 years.

Kadee Quality Products Co. products are not toys and are not intended for children under 14 years old.