#309 HO Scale Under-the-Ties Delayed-Action Electric Uncoupler Kit#309 HO Scale Under-the-Ties Delayed-Action Electric Uncoupler Kit#309 HO Scale Under-the-Ties Delayed-Action Electric Uncoupler Kit#309 HO Scale Under-the-Ties Delayed-Action Electric Uncoupler Kit

#309 HO Scale Under-the-Ties Delayed-Action Electric Uncoupler Kit

$20.15

  • Model: 309
Qty :
remove add
Description

#309 Under-the-Ties Delayed-Action Electric Uncoupler Kit - HO Scale



HO Scale      MAGNE-MATIC

#309 Under-the-Ties Delayed-Action Electric Uncoupler Kit - HO Scale

Delayed Magnetic Uncoupling

Kadee® #165 Red - Normally Open momentary contact push button switches are recommend.

Fits any HO code track.

This package contained one HO Scale Magne-Electric electromagnetic, delayed action uncoupler kit, ready to assemble and install Under-the-Ties. It can be installed on any straight layout track, but especially on mainlines, were false uncoupling my occur.

Fits any HO code track.

Operates: 16 volt DC.
We recommend a 16 volt DC power source (at least 3 Amps) or 18 volt AC power source (at least 3 Amps)converted to DC with bridge rectifier.

WARNING: Do not use the uncoupler continually. DO NOT activate the uncoupler for longer than 2 MINUTES at one time.
This will avoid possible overheating which will damage the uncoupler.

#309 Instructions

(Track Not Included)

One per package

UPC: 765484003090

USA Flag  Made in the U.S.A.

HO-Scale

Package Includes:

  • (1) Each Coil
  • (1) Each Steel core
  • (4) Each Field plates
  • (1) Each Field plate divider
  • (1) Each Upper track mounting plate
  • (1) Each 10-32 x 7/8" Bolt
  • (1) Each 10-32 Nut
  • (3) Each 2 x 3/8" flat head self-tapping screws
  • (4) Each 0-48 x 1/4" screws
  • (4) Each 0-48 x 3/8" screws
  • (1) Each Bridge Rectifier
  • (1) Each Capacitor

Recommended Accessories:

  • 3 Amp Push button momentary switch
  • SPST - Normally Open (Kadee #165)
  • Light bulb - 14-20 Volts, .2 Amp
  • #20 AWG Wire- insulated, strand in two color codes
  • Rosin Core Solder - 1/16" size
  • Track Section, 3 1/2" long
  • Roadbed Section, 2 1/8" long
  • Metal Rail Joiners
  • Ballast

 

Recommended Tools:

  • Power or Crank Drill - with 1/4" bit
  • 1/4" Drill
  • #52 Drill (Kadee #780 Tap & Drill set)
  • #55 Drill (Kadee #780 Tap & Drill set)
  • Reg. Screwdriver - with 1/8" head
  • Modeler's Knife
  • Razor Saw
  • Flat Chisel, 1/2"
  • Medium Tooth File - 1/2" wide
  • Household Pliers
  • Soldering Iron
  • White Glue
  • Fine Tooth File - 1/2" wide

 


Delayed Magnetic Uncoupling


WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

WARNING WARNING: CHOKING HAZARD - Small Parts - Not for children under 14 years.

Kadee Quality Products Co. products are not toys and are not intended for children under 14 years old.

Cart