#810 O Scale Thru-the-Ties Delayed-Action Electric Uncoupler Kit#810 O Scale Thru-the-Ties Delayed-Action Electric Uncoupler Kit#810 O Scale Thru-the-Ties Delayed-Action Electric Uncoupler Kit#810 O Scale Thru-the-Ties Delayed-Action Electric Uncoupler Kit#810 O Scale Thru-the-Ties Delayed-Action Electric Uncoupler Kit#810 O Scale Thru-the-Ties Delayed-Action Electric Uncoupler Kit

#810 O Scale Thru-the-Ties Delayed-Action Electric Uncoupler Kit

$21.60

  • Model: 810
Qty :
remove add
Description

#810 Thru-the-Ties Delayed-Action Electric Uncoupler Kit - O Scale



O Scale      MAGNE-MATIC


#810 Thru-the-Ties Delayed-Action Electric Uncoupler Kit - O Scale

Delayed Magnetic Uncoupling

KadeeĀ® #165 Red - Normally Open momentary contact push button switches are recommend.

This package contained one O Scale Magne-Electric electromagnetic, delayed action uncoupler kit, ready to assemble and install Thru-the-Ties. It can be installed on any straight layout track, but especially on mainlines, were false uncoupling my occur.

Operates: 16 volt DC.
We recommend a 16 volt DC power source (at least 2 Amps) or 12-20 volt AC power source (at least 2 Amps) converted to DC with bridge rectifier*. (*bridge rectifier & capacitor not included)

Fits codes 100, 125, 156 and 172 track.

WARNING: Do not use the uncoupler continually. DO NOT activate the uncoupler for longer than 3 MINUTES at one time.
This will avoid possible overheating which will damage the uncoupler.


Track not included

#810 Instructions

One per package

UPC: 765484008101

USA Flag  Made in the U.S.A.

O Scale

Package Includes:

  • (2) each Coils
  • (2) each Steel Cores
  • (4) each Field Plates
  • (1) each Feild Plate Divider
  • (1) each Track Mounting Plate
  • (2) each Code 125Spacers
  • (2) each Code 156 Spacers
  • (2) each Code 172 Spacers
  • (1) each 10-32 x 1 1/2" Bolt
  • (1) each 10-32 Nut
  • (4) each 2 x 3/8" flat head self-tapping screws

Recommended Accessories:

  • 3 Amp Push button momentary switch
  • SPST - Normally Open (Kadee #165)
  • Light bulb - 14-20 Volts, .2 Amp
  • #20 AWG Wire- insulated, strand in two color codes
  • Rosin Core Solder - 1/16" size
  • Track Section, 3 1/2" long
  • Roadbed Section, 2 1/8" long
  • Metal Rail Joiners
  • Ballast

 

AC to DC Conversion:

  • Single Phase Full Wave Bridge Rectifier rated 1.5 Amp, 50 Volts (If using 12-20 Volts AC as your power source)
  • Electrolytic capacitor rated at 1000 MFD, 50 WV (If using 12-20 Volts AC as your power source)


Recommended Tools:

  • Power or Crank Drill - with 1/4" bit
  • 1/4" Drill
  • Reg. Screwdriver - with 1/8" head
  • Modeler's Knife
  • Razor Saw
  • Flat Chisel, 1/2"
  • Medium Tooth File - 1/2" wide
  • Household Pliers
  • Soldering Iron
  • Contact Cement
  • Cyano Acrylate
  • White Glue
  • Fine Tooth File - 1/2" wide

 


Delayed Magnetic Uncoupling


WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

WARNING WARNING: CHOKING HAZARD - Small Parts - Not for children under 14 years.

Kadee Quality Products Co. products are not toys and are not intended for children under 14 years old.

Cart