#9 HO Scale Metal Couplers with Gearboxes - Medium (9/32") Centerset Shank - For Early Tyco Metal Trucks & Craftsman Kits
Truck Talgo Mount Coupler for Early Tyco Metal Trucks & Craftsman Kits
Metal Coupler with insulated Draft Gear Box and Lid, bronze Centering Spring and side and smaller center screw mounting hole used for truck mounting situations, similar to NO.5® Coupler.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
Refer to our helpful Coupler Conversion Charts to determine the appropriate coupler to use on your model.
#9 Coupler Instructions
Two pair per package
UPC: 765484000099
Made in the U.S.A.
HO-Scale
Package Includes:
- (2) Pair NO.5® Metal Couplers - Medium Centerset Shank
- (2) Pair #634 Centering Spring NO.5® Style
- (2) Pair #9 draft Gearboxes
- (2) #622 Knuckle Springs
NO.5® Metal Coupler Features:
Material |
- Metal |
Shank Length |
- Medium (9/32") (center hole to back of coupler head) |
Coupler Offset |
- Centerset |
Knuckle Spring |
- #622 |
Centering System |
- Standard Shank |
Centering Spring |
- #634 Centering Spring NO.5® Style |
Head |
- Standard Head |
#9 Plastic Draft Gearboxes & Lids Features:
Material |
- Insulated Plastic |
Dimensions |
- 29/64"L x 19/64"W x 7/64"H |
Mounting Specifications:
Mounting Height -
top of gearbox |
- 29/64" |
Mounting Height -
bottom of gearbox |
- 21/64" |
Centerline |
- 25/64" |
Trip Pin Height |
- 1/32" |
Center Hole |
- 0-48 Self-Tapping are the most commonly used. (Screw length will vary) |
Side Holes |
- 0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) |
Recommended Tools:

Distributor must purchase in bundles of 6
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
WARNING: CHOKING HAZARD - Small Parts - Not for children under 14 years.
Kadee Quality Products Co. products are not toys and are not intended for children under 14 years old.