Tiger Valley Models - HO Coupler Conversions
|Newer HO-Scale Models with Factory Knuckle Couplers will not be listed. They are easily converted by using our #148 or "scale" head #158 Whisker® Couplers.
**Note: Some manufacturers now produce models with non-industry standard coupler pockets. These smaller coupler pockets may require slight modification to the gearbox or coupler to function properly. If the model has a removable gearbox it can be replaced with a Kadee® gearbox. If the model has an integrated gearbox, the coupler shank may be filed down to fit.
|Whisker® Metal Coupler||Standard Coupler||Other Coupler Options|
#118, #119, #158
Anywhere a NO.5® is listed, the #28, #58 or #118, #119, #158, #148 Whisker Coupler can be used in its place.
*Our conversion’s based on only one model from a production run, there may be inconsistencies in a model’s production run that require a different coupler or model modifications to achieve the proper coupler height for coupler function.
** Metal Coupler Note: It is not recommended to use a metal coupler directly on a metal surface to avoid the possible electrical crossover or shorting that may cause damage.