Laser Custom Waterslide Decals
Laser CMYK 4-Color Process Custom Printed Waterslide Decals
Short Run No Minimums
Clear Waterslide Decal Paper
Full color Custom printed waterslide decals for model railroad, model building, automobiles, trains, airplanes, helicopters, RC cars, cars, boats, vehicles, ships, railroads, rockets, slot cars, bicycles, motorcycle, restorations, nails, guitars, company logos.
Optional Oven Curing (ceramics, glass or metal only):
Once decal is applied and let dry for 3 hrs. The decal can be oven cured up to 350°F for 10 min.
This can provide a better decal bond for some surfaces.
Below are the Prices for Laser Custom Waterslide Decals.
NOTE: Full Color Custom Decals are a blend of
Cyan, Magenta, Yellow, Black only.
No White, Florescent or Metallic colors.
8" x 10" Image Area
CMYK 4-Color Process Laser Decals
Color Laser Printers only print Cyan, Magenta, Yellow, Black Toner.
Colors are not opaque they are around 33% translucent.
So the color of the substrate you place the decals on will affect the final ink color.
Full Color water slide Decals, Small Runs, No Minimums, Quick Turn Around,
legible lettering down to around 6pt font, approximately 150 lpi screening, 600 dpi resolution.
No White or Metallic Ink
Custom Laser Printed Clear Waterslide Decal Pricing
Your Artwork Submitted Must Meet Our File Preparation Ready to Run Requirements.
NOTE: A photo of
an object or a old decal set is not ready to run artwork.
Ink fee based off average coverage area. If Ink coverage area is heavy extra fees will apply per sheet.
Additional preparation fees will apply if original submitted artwork is not set up to file requirements (ready to run).
If we accept a incorrectly setup file any modifications needed will be billed at $90 hr with a $25 minimum + normal file fees. If fonts are not converted to outlines, there is a $15 minimum fee per font for installing or substituting fonts.
(All fonts used must be supplied with file if fonts are not converted to outlines.
embedding fonts is not acceptable.)
8" x 10" Image Area
Your Ready to Run Correctly Setup & Submitted Artwork
with Average Ink Coverage
Extra fees may apply
Custom Laser Printed Water Slide Decal - from your ready to run Artwork
Ordering & Pricing
Kadee® decal thickness should be about 0.0003 in. or 3 ten-thousandths thick once applied.
Making Decals Scratch Resistant
The decal paper manufacturer recommends "Liquid Decal Film" by MicroScale.
Laser Custom Decal File Preparation Requirements
Artwork: 8" x 10" Image Area max.
Artwork created from photo editing software (Adobe Photoshop or Corel PaintShop). Saved as (psd, pdf, eps, tif or jpg) only. Tif is preferred. No (BMP, GIF, PNG) files. The file must be actual size, the resolution of the file must be a minimum of 600 dpi.
Artwork created from Adobe Illustrator or Corel Draw. Saved as (pdf, eps, or ai) only. Note: All font's must be converted to outlines (Embedding fonts is not acceptable). The file must be actual size.
Artwork created from some other software. Saved as a pdf only. If you don't have the option to save as a PDF from your software, You will need to convert it to a pdf using a pdf converter like CutePDF Printer or a pdf converter web service. Note: All font's must be converted to outlines (Embedding fonts is not acceptable). The file must be actual size.
Additional setup fees will apply if files are submitted incorrectly.
|Decals are printed on clear water slide decal paper.
Laser Custom Decals Terms & Conditions
You are responsible for the quality of original artwork reproduction, color setup, color separations in spot color, color trapping, turning all fonts to outlines, artwork margins & file setup. All multiple color run decal artwork files must be setup with each color on its own layer. We accept artwork in EPS or AI form (vector graphics produce best results) as well as TIFF or JPG form (bitmap images not recommended). We reserve the right to review decal artwork.
You are responsible for all copyright, & trade mark conformance's.
You need written permission for copyrighted material, even when it is for personal use. There are exceptions, you must read the copyrighted materials owners legal-notice's for their copyright policy's. You are paying someone to reproduce the copyrighted material and not reproducing it yourself. We do not reproduce copyrighted material without written permission.
Decal are run usually within 2-3 business days. Extra fees may apply. Prices subject to change without notice. + shipping & handling charges.
Kadee® Quality Products Co.
custom laser decal e-mail
Before calling or e-mailing please read this page in its entirety, most questions can be answered from information we have provided on this web page.
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
WARNING: CHOKING HAZARD - Small Parts - Not for children under 14 years.
Kadee Quality Products Co. products are not toys and are not intended for children under 14 years old.