Monthly Archives: January 2023
I am going to go over coupler heights again since I am still seeing so-called “HOW TO VIDEOS” on YouTube that has so much bad information they need to be removed. I am telling you, the amount of bad, misleading information on YouTube is disheartening!
I can’t emphasize this enough, check your coupler height with a height gauge, setting your coupler height using the centerline of the couplers, and make the necessary fine-tuning adjustments. These adjustments need to be precise for proper working couplers. “Good enough” doesn’t work for trouble-free operation. Checking your coupler height is something that should be, second nature for everyone in the hobby. “Scale” couplers make this even more critical because the coupler pulling face is smaller. See the below details.
STOP BENDING THE TRIP PINS!The trip pins are factory set, and if your coupler is mounted correctly and set to the Kadee coupler height gauge, your trip pin will not need to be